| Spacewalks - 3 |
| Space Flights |
Date & Duration |
Purpose |
| STS-130 |
February 12, 2010 |
International Space Station Assembly - Prepare the Tranquility module for
attachment to the International Space Station. Remove the temporary storage
platform from Dextre and store on the station's truss. Connect temporary
heating cables and avionics cables to the Tranquility module |
| 6 hours 32 minutes |
| STS-130 |
February 14, 2010 |
International Space Station Assembly - Install insulations covers on trunnions
and keel pin on the Tranquillity module. Connect ammonia lines to the Tranquility
module. Install an atmospheric control and resupply system vent relief
valve and eight handrails on the Tranquility module |
| 5 hours 54 minutes |
| STS-130 |
February 17, 2010 |
International Space Station Assembly - Connect heater and data cables to
Pressurized Mating Adapter 3. Open ammonia flow to the Tranquility module.
Disconnect temporary heating cables from the Tranquility module. Remove
insulation covers from the Cupola. Release launch locks from the Cupola
window covers. Install handrails, worksite interfaces and gap spanners
on the Tranquility module |
| 5 hours 48 minutes |